Change of Plans

Tonight I was supposed to be showing you all these wonderful pictures of my completed mechanical frame for my 3-D printer. Unfortunately that will not happen for two reasons:

1) I am a little behind schedule and all the parts for the mechanical frame will not get here until tomorrow

2) I was reading more into the assembly of the printer and have come to realize that mechanical assembly and electronic assembly happen at the same time, you can't do one half and the other half later.

That being said I have to alter my deliverable schedule slightly:

New Deliverable times:

February 20 Deliverable	Printer mostly assembled and ready for testing
March 13 Deliverable	Complete the Software portion of the build and Calibrate the printer
April 10 Deliverable	A complete fully operational 3-D printer

I still have been getting things ordered for the printer. I have ordered most electronics including:

1x 40mm cooling fan, will get here sometime in February from China. 

My little fan coming across the Pacific

Electronics Kit:

This kit includes:

• Ramps 1.4 (The small red thing)
• Arduino Mega (The blue thing)
• LCD Controller (Not Necessary but a nice extra)
• GT2 Belt
• Heated Bed
• End stops
• Stepper Drivers
• Usb Cable
• Software Disc

This leaves only a few parts left for me to get including:

• Power Supply
• Motors
• Hot end
• Printed Parts

Everything else has been ordered and is making its way across the country. Currently I have parts coming from New Hampshire, Nevada, and China. Once I get the other few things I will begin assembly on the printer.

One last note, the printed parts I still need to get come in many color4s and am still trying to make up my mind on what to pick.

The Electronics

Now that I have the mechanical components taken care off it's time to begin getting the electronics for the printer together. In my previous post I discussed the various parts off the printer, including the electronics. Specifically these parts include:

5x NEMA 17 Stepper motors- These make the axis' move up, down, right, and left.

5x Motor Drivers- These provide heat sinks to prevent motors from overheating.

3x End stops- These provide data to the controller so to indicate extruder position.

1x Arduino Mega- This micro-controller turns computer signals into motion.

1x Ramps 1.4- This is a "shield" for the Arduino that translates signals to motion, what you plug components into.

1x Power Supply- Provides the necessary power to drive all the components

1x Heated Bed- Provides better prints by allowing the parts to cool faster.

1x Hotend- Melts the plastic for printing

*Parts below are considered optional
1x Raspberry Pi- This would allow me to print through WiFi as well as allow me to add a webcam to monitor my prints when I'm away.

1x Smart printer controller with LCD- The screen on this unit allows me to control the printer, upload files, and monitor conditions without a separate computer.

A wiring diagram with all the electronics

Where will you get the parts?
As I described in my first post most of the electronic controllers will be bought in the form of a bundle to save money. From what I have seen a electronics kit including the heated bed, LCD, Ramps 1.4, Arduino Mega, endtsops, and motor drivers as well as the belt to finish mechanical construction are available from various sellers for $89.99.  The power supply I will source from Amazon for the modest price of around $20. The hotend I purchase will depend on my extruder but most likely that will cost around $25 and be sourced from Ebay.

Parts of a 3-D Printer

Since I keep throwing around the idea of 3-D printing, and its applications, as well as the process of building one, but haven't really discussed how they work or there parts. In doing this I hope that it will be easier to understand the topics I discuss in my blog.

A basic explanation on how a 3-D printer works

The process of printing a objects begins with designing a item in a 3-D modeling program such as Blender or downloading a file from the internet. This item is represented as a whole object so you have to get it into g-code to send to the printer. G-code splits the object into hundreds or thousands of layers of 2 dimensional shapes that stack together on the printer to create the object. This code is then sent to the 3-d printer driver.

Frame- For my 3D printer I am using a melamine or acrylic frame that us bolted together with metal rods. These rods transfer motion from the stepper motors to the extruder or hot end.

Printer Control Board- This board transfer the g-code to the motors. The board tells how many steps the motors need to take, the extruder speed, the hot end temperature, the heated bed temperature and much more. All of the electronic components are connected to this.

Extruder- This part of the printer is supported on the printers gantry. It pushes the filament through the hot end to be melted into a object. I currently plan on using a single extruder but may evolve to a dual extruder later on to print two colors at once. Thats the great thing about having a 3-D printer, you can improve it however you want!

Filament- This is the source of your printers object. Since spontaneous creation is still impossible the material has to come from somewhere. Typically packaged on a continuous roll and available i hundreds of colors and materials filament decides what your objects will be made of.

Motors- These motors, NEMA 17 stepper motors in my case, control all of the motion on the printer. Upon each electrical signal they move one step, 1.8°. The motors have to work in sync, all 4 of the motors required for motion to have a successful and accurate print.

Heated Bed- Although considered a optional component a heated bed is one of the best upgrades o make to your printer. Having one allows to print in more materials as the can keep the parts warm enough to melt together without cracking. The bed heats glass that the pieces are printed on.

I hope that this has helped you have a deeper understanding in the components of 3-D printing.

A quick video description from CNN is available here.

Look for more on the electronics next week.

Not Much Progress

Progress on the 3-D Printer

Unfortunately I didn't make huge strides towards my 3-D printer. I spent my time doing some more research on parts kits. For financial and availability reasons I have chosen to order a kit containing the parts needed for the mechanical portion of the printer. By ordering a kit I can get all the parts I cannot find locally as well as for around $50 less than buying individual parts. This also ensures that the parts will work together. The kit I am looking at purchasing comes with the rods, hardware, bearings, and frame. It appears I will need to purchase the 3-D printed parts separate even though the description says otherwise. I am planning on purchasing the required mechanical parts tomorrow (1/6/15) and they will take a few days to get here from Las Vegas, Nevada.

The Table

I mentioned in a earlier post that I was going to get some pallets to build a new desk/table out of to build my printer on. I was fortunate to find some little used pallets to use for my project. I began by taking the pallets apart. Although they are made to just carry copiers and other such items they are built to last. This can be difficult since my goal is to take them apart for there wood. For my pallets the choose to put two inches of board together with a 3 inch hybrid nail and then bang the extra into the wood. So for each board I had to first get the nail out of the wood with a screwdriver and a sharpened railroad spike. This resulted in my screwdriver breaking, a testament to the pallets strength. While doing this some of the boards split. I have since glued and clamped them together. After thats done I will join the boards together on top of some OSB. If all goes to plan I will have my completed tabletop by Friday ready to find some legs.